In simple terms, the spray test chamber is a branch of the environmental test chamber, called the climate and climate test chamber. Its purpose is to check the waterproof performance of the product by simulating soaking and rainy conditions.
The spray test chamber is widely used in electronic products, solar power generation, buried lights, car lights, fountain lights, auto parts, garden lights, tunnel lights, and other products. This equipment is designed according to international quality and safety standards, in accordance with IEC60529-2001 standards. At the same time, the simulation experiment and test results are accurate and reliable.
Linkotest designs and manufactures environment test chambers including temperature humidity chambers, walk-in test chambers, thermal shock test chambers, fast change rate test chambers, agree chambers, xenon arc test chambers, uv test chambers, accelerated aging test chamber, rain & spray test chamber, salt spray test chamber, compound salt spray test chamber, laboratory oven, and other products to meet your different environmental test needs.
Actually, the Rainfall Lab is a closed lab that can control the amount and timing of simulated rainfall. To test the water resistance of the target product, you should pour water into the test housing through a specially designed nozzle.
The flow meter has an adjustable valve to provide water spray with specified flow parameters. If you want to control the water distribution on the surface of the product under test, you can use a rotating test stand mounted in the spray chamber.
First, the test chamber is equipped with a guidepost. The guide column is composed of high-quality plastic-coated square steel pipe, a water supply pump, a conductive sliding block, an electrical controller, a rotating sample table with an adjustable valve, and a rotating test table for controlling water distribution.
Second, the equipment is made of high-quality construction materials to ensure safe and reliable operation.
Third, the parts that touch the water are made of high-quality stainless steel.
The most important point is that this product can transcend the limitations of time and season and imitate the typical environmental conditions of nature. What’s more, it can save a lot of human and money resources. Of course, research money can also be saved when using simulated environments.
This test has an acceleration feature that will shorten your cycle time. This product can adapt to long-term, stable, safe, and reliable, its design is reasonable, and advanced parts. It has the advantages of simple operation, convenient installation, handling, and maintenance.
In addition, the inner liner of the equipment is made of high-quality stainless steel. The large glass viewing window looks beautiful appearance. And the pipes and swing sets are made of stainless steel. With security protection function.
The following are the characteristics of the rainwater test chamber.
1) Main Features
- Configure components of international brands.
- Competitive prices.
- A wider range of applications.
- Easy installation.
- Safe and reliable operation.
- In line with the IEC60529-2001 standard.
- The introduction of Japanese and German refrigeration technology, energy saving 20%.
- Provide standard design and custom design.
2) Safety Features
- Leakage protection.
- Overload and short circuit protection.
- Timing and accurate water control of the whole test device.
- Automatic power failure with fault alarm.
- Automatic adjustment system for too long time.
You can choose a fixed product rack, water pressure regulator, water meter, or flow meter. In addition, it has a high-capacity floor drain system that drains water out of the chamber. It has a large capacity reservoir with automatic water refill facilities.
What’s more, it has an independent water circulation system. You can minimize your costs and save up to 20% of energy compared to conventional technologies. Finally, it is a new modern design. Touch color LCD screen to simulate rainfall environment. Detect whether your product is flooded, easy to operate, save time and improve work efficiency.
- Temperature/humidity control room: includes -20 to 150°C and 20 to 95%RH capacity
- Water recycling: Allow reuse of treated stormwater
- Water conditioning: Allow water to cool before spraying (5 to 20°C)
- High-pressure spray: Increased ability to meet car wash test requirements
- Drip Grid: Added functionality to meet drip test requirements
- Rotary table: Rotate the sample to fully expose it to the spray
The following is an introduction to the accessories of the rain spray test chamber.
1) The studio
The internal material is 304 stainless steel, mirror, rust resistance, high-temperature resistance, corrosion resistance; Durable, long service life.
2) Flowing pipe
The flow tube is made of stainless steel. The tube should rotate around the X-S axis at a speed of approximately 23r/min.
Usually, the rainwater test chamber is used to test the product during transportation. Especially in the transition process of the ship, the waterproof sealing performance under different rain pressure. We evaluate the water resistance of your product by simulating the natural rainfall environment. This method helps to find the defects of the product under test. This greatly improves the performance of your product before it goes to market.
IP X8: Floodproof – The rain test chamber is designed for continuous immersion in water under conditions determined by the manufacturer.
I believe that with this information, you will be able to purchase a rain and spray test chamber tailored to your specific needs. If you have any more questions, please leave your message in the comments section.